Bsc Preferred LRAD252155L3 Drop-in Kitchen Sink Ada

Product Description

The BSC PREFERRED LRAD252155L3 is an 18-gauge Type 304 stainless steel single bowl drop-in sink designed for residential and light commercial kitchen installations. Measuring 25 inches by 21.25 inches by 5.5 inches, the bowl provides generous capacity for washing and stacking. An offset drain positioned at the rear left maximizes usable cabinet space below and supports efficient drainage. Sound-deadening pads bonded to the sink bottom reduce vibration and noise during use. The uniform grain finish reflects light evenly and resists surface dulling over time. Licensed plumbers and qualified installers handle this fitting in new construction and remodel applications alike.

This sink is suited for residential kitchens, prep areas, and select commercial applications where a drop-in configuration is required. The U-channel mounting system allows clips to seat inside the channel during installation, reducing setup time and improving clip alignment. The sink accommodates three faucet holes and requires a minimum cabinet size of 30 inches. The countertop cutout dimensions are 24.375 inches by 20.625 inches, which are compatible with a wide range of countertop materials and profiles. When installed per applicable guidelines, the sink meets ADA compliance requirements for accessible kitchen configurations.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Offset rear-left drain placement maximizes under-sink cabinet space
• U-channel design simplifies mounting clip installation
• Bottom sound-deadening pads reduce vibration and operational noise
• Three faucet holes accommodate standard deck-mount faucet configurations
• ADA-compliant when installed per applicable accessibility guidelines
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-install sink for kitchen countertop applications requiring a 24.375-inch by 20.625-inch cutout and a minimum 30-inch base cabinet. Accepts standard 3.5-inch kitchen drain fittings.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and the International Plumbing Code. Shut off the water supply and disconnect any existing drain and supply lines before beginning work. Apply a continuous bead of silicone sealant around the underside of the rim before setting the sink into the cutout, then secure mounting clips evenly inside the U-channel. Verify ADA-compliant mounting height requirements with local code authority if accessibility compliance is required for the project.