Bsc Preferred LRAD221965MR2 Drop-in Kitchen Sink 22x19.5

Product Description

The BSC PREFERRED LRAD221965MR2 is a single-bowl, drop-in kitchen sink manufactured from 18-gauge Type 304 stainless steel. It measures 22 inches long by 19.5 inches wide by 6.5 inches deep and weighs 13 pounds. The sink features a rear center drain placement, a scratch-resistant lustrous finish, and Sound Guard sound-deadening pads to reduce operational noise. The U-channel mounting design allows internal clip placement, eliminating the need for external hardware during installation. Licensed plumbers and kitchen installers are the primary trade professionals who specify and install this unit.

The LRAD221965MR2 is suited for residential kitchen installations and accessible commercial applications. It carries ADA compliance, making it appropriate for projects where accessibility standards must be met. The usable bowl interior measures 18 inches by 14 inches, providing practical capacity for standard kitchen tasks. A minimum cabinet size of 27 inches is required. Faucet hole configuration is MR2. The countertop cutout dimensions are 21-3/8 inches by 18-7/8 inches with a 1-1/2 inch corner radius. A cutout template is included to guide countertop modifications.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Sound Guard sound-deadening pads reduce noise during water flow and dish handling
• ADA-compliant design meets accessibility requirements for residential and commercial projects
• Rear center drain placement maximizes under-sink storage clearance
• U-channel mounting system accepts internal clip placement for a clean countertop finish
• Scratch-resistant finish compatible with manufacturer restoration kits for deeper scratch repair
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new installation sink for kitchen countertop applications requiring a minimum 27-inch base cabinet and MR2 faucet hole configuration. Countertop cutout dimensions of 21-3/8 inches by 18-7/8 inches with a 1-1/2 inch corner radius must be observed.

Installation Notes

Installation is performed by a licensed plumber in accordance with applicable IPC requirements. Shut off the water supply and disconnect existing drain and supply lines before beginning work. Use the included cutout template to mark the countertop accurately before cutting. Mounting clips are applied internally via the U-channel rail system; apply a continuous bead of silicone sealant around the cutout perimeter per the manufacturer instructions before setting the sink.