Bsc Preferred LRAD191955OS4 Drop-in Kitchen Sink Single Bowl

Product Description

The BSC PREFERRED LRAD191955OS4 is a single-bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel in the Lustertone Classic series. It measures 19.5 inches long by 19 inches wide by 5.5 inches deep, with a usable bowl depth of 5.375 inches. An offset 3.5-inch rear drain placement maximizes the flat working area at the bowl bottom and keeps the P-trap low in the cabinet below. Sound Guard technology uses large sound-deadening pads bonded to the underside of the bowl to reduce noise during washing. This sink is manufactured in the USA and carries ADA compliance. Plumbers and finish carpenters install this unit in new construction and remodel applications.

The LRAD191955OS4 is suited for residential kitchens and light commercial settings where a compact, single-bowl drop-in sink is required. The OS4 faucet hole configuration accommodates a wide range of four-hole faucet and accessory setups. Installation requires a minimum cabinet width of 24 inches. The countertop cut-out dimensions are 18.875 inches by 18.375 inches, fitting standard countertop materials including laminate, solid surface, tile, and stone. The rectangular bowl profile and drop-in rim make it compatible with most standard countertop thicknesses used in residential kitchen construction.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Sound Guard sound-deadening pads bonded to the underside for quieter operation
• Offset 3.5-inch rear drain maximizes usable bowl floor space and simplifies cabinet plumbing
• OS4 faucet hole configuration supports four-hole faucet and accessory combinations
• ADA compliant design meeting accessibility requirements without sacrificing function
• Scratch-resistant bowl surface; deep scratches can be repaired to restore appearance
• USA manufactured

Compatibility

Designed for drop-in installation in countertops with a cut-out of 18.875 inches by 18.375 inches and cabinets with a minimum width of 24 inches. Compatible with OS4 four-hole faucet configurations.

Installation Notes

Installation is performed by a licensed plumber or experienced finish contractor. Shut off the water supply and disconnect any existing drain and supply lines before removing a previous sink. Apply a continuous bead of silicone sealant around the cut-out perimeter before setting the sink rim to ensure a watertight seal. Verify local plumbing code requirements, including those referenced under the IPC, for drain sizing and trap placement before completing rough-in work.