Bsc Preferred LRAD1919501 Drop-in Kitchen Sink Ada

Product Description

The BSC PREFERRED LRAD1919501 is a single bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel with a Lustertone finish. It measures 19.5 inches long by 19 inches wide by 5 inches deep, with a bowl interior of 16 inches by 13.5 inches. The sink meets ADA compliance requirements and features a rear center drain placement that maximizes usable bottom space for large cookware. Sound guard technology uses large damping pads bonded to the underside to reduce vibration and noise during use. Licensed plumbers and experienced installers handle this type of fixture as part of a standard rough-in or remodel scope.

This sink is suited for residential kitchens requiring an accessible drop-in installation. The rear center drain configuration is well adapted for kitchen prep, bar installations, laundry areas, and light commercial setups. A minimum cabinet opening of 24 inches is required for proper fit. The single-faucet-hole configuration accommodates standard deck-mount faucet installations. The U-channel mounting design simplifies drop-in seating and reduces under-sink labor during installation.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Lustertone finish is scratch-resistant and repairable using a compatible restoration kit
• Sound guard undercoating with large damping pads minimizes wash basin noise
• Rear center drain placement maximizes bowl floor space for oversized cookware
• ADA-compliant drop-in design suitable for accessible kitchen installations
• U-channel mounting system simplifies installation in standard drop-in cutouts

Compatibility

Designed for drop-in installation in countertops with a minimum cabinet size of 24 inches. Compatible with 1-faucet hole deck-mount faucet configurations. Suitable for residential and light commercial applications including kitchen, bar, and laundry sink setups.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local IPC requirements. Shut off the water supply and disconnect existing drain and supply lines before beginning work. Apply a continuous bead of plumber's putty or silicone sealant around the underside of the sink rim before setting into the cutout to ensure a watertight seal. Do not overtighten mounting clips, as this can distort the sink flange or damage the countertop surface.