Bsc Preferred LRAD1919403 Drop-in Sink Single Bowl

Product Description

The BSC PREFERRED LRAD1919403 is an 18-gauge Type 304 stainless steel drop-in sink designed for residential kitchens, prep areas, and laundry rooms. The overall unit measures 19.5 inches in length, 19 inches in width, and 4 inches in depth. The single-bowl basin provides uninterrupted workspace for dishwashing and food prep. A rear center drain placement maximizes usable basin space and allows clear access to cabinetry below. Sound guard pads are bonded to the underside to dampen water and impact noise during use. ADA compliant when properly installed. Made in the USA.

This sink is suited for residential kitchen installations where a drop-in configuration is required. The U-channel rim design allows mounting clips to be set inside the sink before it is lowered into the countertop cutout, reducing time spent working from below the cabinet. Three faucet holes are pre-punched into the deck. A minimum cabinet size of 24 inches is required. The 3.5-inch drain opening is sized for standard kitchen basket strainer assemblies. The sink is also used in food prep stations and utility or laundry room installations.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Single bowl measuring 16 inches in length and 13.5 inches in width for unobstructed workspace
• Rear center drain positioning increases basin usability and cabinet clearance below
• Sound guard undercoating with large pads reduces drain and impact noise
• U-channel rim allows mounting clips to be loaded before drop-in placement, simplifying installation
• ADA compliant when installed per applicable guidelines
• Repairable scratch-resistant finish — light surface scratches blend into the directional grain over time

Compatibility

Designed as a drop-in replacement or new-construction sink for residential kitchen and prep area applications requiring a single-bowl stainless steel unit. Requires a countertop cutout sized to the manufacturer specification and a minimum 24-inch base cabinet.

Installation Notes

Installation is performed by a licensed plumber or qualified installer following applicable IPC guidelines. Shut off the water supply and disconnect drain plumbing before removing an existing sink. Load mounting clips into the U-channel before lowering the sink into the cutout, then tighten clips from above using a screwdriver. Apply a continuous bead of approved silicone sealant around the rim perimeter before setting the sink to prevent leaks and cabinet moisture damage.