Bsc Preferred LRAD1722502 Drop-in Kitchen Sink Ada

Product Description

The BSC PREFERRED LRAD1722502 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential kitchen installations. The single rectangular bowl measures 13.5 inches by 16 inches with a depth of 4.875 inches, providing usable capacity for washing and stacking. A rear center drain positioned at 3.5 inches maximizes floor space inside the bowl and cabinet clearance below. Sound-deadening pads are applied to the underside to reduce basin noise during use. The scratch-resistant finish resists everyday surface wear and can be restored using a compatible stainless steel restoration kit. Made in the USA.

This sink is suited for residential kitchen countertop installations where ADA accessibility compliance is required. The U-channel mounting system allows installation clips to be staged inside the channel before the sink is dropped into the cutout, reducing the need to work underneath the counter during installation. The countertop cutout dimension is 16-3/8 inches by 21-3/8 inches, and the sink is compatible with base cabinets as small as 21 inches wide. It is appropriate for new construction and remodel projects handled by licensed plumbers or skilled tradespeople.

Key Features

• 18-gauge Type 304 stainless steel construction for durability and corrosion resistance
• Single rectangular bowl: 13.5 inches x 16 inches x 4.875 inches deep
• Rear center drain at 3.5 inches maximizes usable bowl and cabinet floor space
• ADA-compliant design meets accessibility requirements
• U-channel drop-in mounting system simplifies clip placement before installation
• Sound-deadening undercoating pads reduce basin noise
• Scratch-resistant finish; repairable with stainless steel restoration kit

Compatibility

Designed as a drop-in replacement or new-install sink for residential kitchen countertops requiring a 16-3/8 inch by 21-3/8 inch cutout and compatible with base cabinets 21 inches wide or larger.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and disconnect drain lines before removing any existing sink. Stage the mounting clips inside the U-channel before lowering the sink into the cutout to avoid working blind underneath the cabinet. Apply a continuous bead of plumber's silicone sealant around the perimeter of the cutout before seating the sink to ensure a watertight seal.