Bsc Preferred LRAD172050MR2 Drop-in Sink 18 Gauge Ada

Product Description

The BSC PREFERRED LRAD172050MR2 is an 18-gauge Type 304 stainless steel drop-in single bowl kitchen sink designed for residential kitchens, prep areas, and laundry spaces. The square bowl measures 14 inches across with a depth of 5 inches, giving installers and end users adequate working volume for heavy-use applications. An offset rear drain placement maximizes usable cabinet space below and promotes efficient drainage. The lustrous finish is scratch-resistant, and light surface marks blend into the grain over time. Sound-deadening bottom pads reduce noise during use. The sink is ADA compliant and made in the USA.

This sink is suited for residential kitchen remodels, new construction, and accessible-design installations where ADA compliance is required. The drop-in configuration mounts to standard countertop cutouts measuring 16-3/8 inches by 19-3/8 inches, with a minimum cabinet size requirement of 21 inches. U-channel mounting clips allow for faster drop-in installation without excessive under-counter maneuvering, making it practical for plumbers and finish carpenters working in tight spaces.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Single bowl drop-in design with 14-inch square bowl and 5-inch depth
• Offset rear drain placement maximizes under-sink storage and improves drainage flow
• U-channel mounting clips for streamlined countertop installation
• Sound-deadening bottom pads reduce water and impact noise
• ADA compliant and manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-install sink for standard countertop openings requiring a cutout of 16-3/8 inches by 19-3/8 inches and a minimum cabinet width of 21 inches.

Installation Notes

Installation is performed by a licensed plumber or qualified finish installer. Shut off the water supply lines and disconnect existing drain plumbing before removing any existing sink. Apply a continuous bead of silicone sealant around the countertop cutout perimeter before setting the sink, then secure with the provided U-channel mounting clips from below. Verify drain alignment and check all connections for leaks before returning the water supply to service.