Bsc Preferred LRAD1720403 Drop-in Kitchen Sink 17x20 in

Product Description

The BSC PREFERRED LRAD1720403 is a single bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel with a lustrous finish. It measures 17 x 20 x 4 inches overall, with a 14 x 14 inch square bowl and a depth of 3.875 inches. The offset drain placement shifts usable cabinet space beneath the sink. An ADA-compliant design, sound-deadening pads, and a U-channel mounting system make this a practical choice for licensed plumbers and kitchen installers working in residential applications. The scratch-resistant surface blends minor marks over time, supporting long-term serviceability in high-use kitchens.

The LRAD1720403 is suited for residential kitchen installations where a drop-in configuration is preferred. The U-channel design allows mounting clips to be seated inside the channel before the sink is lowered into the cutout, reducing time spent working under the counter. A minimum cabinet size of 21 inches is required. The sink accommodates three faucet holes, providing flexibility for faucet and fixture selection. ADA compliance is achieved when the sink is installed per applicable accessibility guidelines. This model is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for durability and corrosion resistance
• 14 x 14 inch square bowl with 3.875 inch depth provides usable wash space
• Offset drain placement maximizes usable under-sink cabinet space
• U-channel drop-in mounting system simplifies clip placement before installation
• Sound-deadening pads reduce vibration and operational noise
• ADA-compliant when installed per accessibility requirements
• Three faucet holes for flexible fixture configuration

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchen applications requiring a minimum 21-inch cabinet width and a 3-1/2 inch drain opening.

Installation Notes

Installation is performed by a licensed plumber in accordance with the International Plumbing Code (IPC) and local jurisdiction requirements. Shut off the water supply and disconnect existing drain and supply lines before removing any existing fixture. Verify cabinet cutout dimensions and minimum cabinet width of 21 inches before setting the sink. Apply a continuous bead of appropriate sealant around the perimeter of the cutout as required by the manufacturer instructions and local code.