Bsc Preferred LRAD1316503 Drop-in Kitchen Sink Ada

Product Description

The BSC PREFERRED LRAD1316503 is a single-bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It is designed for residential and light-commercial applications including kitchen remodels, prep stations, laundry rooms, and bar installations. The square bowl interior measures 10 inches x 10 inches x 4.875 inches, providing an uninterrupted work surface suited for dish washing, food prep, and handling oversized items. Sound-deadening pads are bonded to the underside to reduce operational noise. The sink meets ADA compliance standards, making it suitable for accessible installations. Licensed plumbers and experienced contractors are the typical installers for this unit.

This sink is intended for drop-in installation into countertops with a recommended cut-out of 12-3/8 inches x 15-3/8 inches. The overall sink dimensions are 13 inches x 16 inches, requiring a minimum cabinet width of 18 inches. The U-channel mounting system houses clips within the channel rail, simplifying alignment and securing the sink from below without additional hardware sourcing. A three-hole faucet deck configuration accommodates standard faucet sets and accessory fixtures. The 3.5-inch centered drain placement supports efficient drainage and is compatible with standard basket strainer assemblies. This product is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• ADA-compliant design for accessible residential and commercial installations
• Sound-deadening undercoating pads reduce impact and water noise during use
• U-channel drop-in mounting system with integrated clip housing for straightforward installation
• Scratch-resistant finish; deep scratches are repairable to maintain long-term appearance
• Three-hole faucet deck provides flexibility for a range of fixture configurations
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for countertop cutouts measuring 12-3/8 inches x 15-3/8 inches, fitting cabinets with a minimum 18-inch width. Suitable for kitchen, prep area, laundry room, and bar counter applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and disconnect any existing drain and supply lines before beginning work. Apply a continuous bead of silicone sealant around the countertop cutout perimeter before seating the sink to ensure a watertight seal. Do not overtighten the U-channel mounting clips, as this can distort the sink rim or damage the countertop material.