Bsc Preferred LR43224 Drop-in Double Bowl Kitchen Sink

Product Description

The BSC PREFERRED LR43224 is an 18-gauge Type 304 stainless steel drop-in kitchen sink featuring two equal rectangular bowls in a single unit. Each bowl measures 19 inches by 16 inches with a depth of 7.5 inches. The overall sink dimensions are 43 inches by 22 inches by 7.625 inches. The Lustertone Classic finish delivers a scratch-resistant surface that helps conceal minor surface marks over time. Bottom-only sound-deadening pads reduce vibration and noise during use. A U-channel mounting system positions the mounting clips inside the channel, simplifying installation and reducing time spent working beneath the cabinet. This sink is installed by licensed plumbers and experienced remodeling contractors.

The LR43224 is suited for residential kitchen installations where a full-size double-bowl configuration is required. The two equally sized bowls allow simultaneous washing, soaking, rinsing, and drying tasks. Four pre-drilled faucet holes accommodate standard deck-mount faucet configurations. The 3.5-inch drain opening accepts standard kitchen drain assemblies. A minimum cabinet cutout size of 48 inches is required for proper fit. Straight sidewalls maximize usable interior bowl volume and allow efficient stacking of cookware and dishes. The sink is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and durability
• Equal double-bowl layout — each bowl 19 inches by 16 inches by 7.5 inches deep
• Lustertone Classic scratch-resistant finish helps conceal minor surface wear
• Bottom-only sound-deadening pads reduce vibration and ambient noise
• U-channel mounting system with interior clip placement for simplified drop-in installation
• Four faucet holes and 3.5-inch drain opening for standard fixture compatibility
• Made in the USA

Compatibility

Designed for drop-in installation in kitchen cabinets with a minimum cabinet opening of 48 inches. Accepts standard 3.5-inch kitchen drain assemblies and deck-mount faucet hardware.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before beginning any sink swap. Apply a continuous bead of plumber's putty or silicone sealant around the perimeter of the cutout before setting the sink to ensure a watertight seal. Verify cabinet and countertop support are adequate for the sink weight of 26 pounds prior to installation.