Bsc Preferred LR3322MR2 Double Bowl Drop-in Sink 33x22

Product Description

The BSC PREFERRED LR3322MR2 is an 18-gauge Type 304 stainless steel double bowl drop-in kitchen sink designed for residential kitchen installations. Overall dimensions measure 33 inches in length, 22 inches in width, and 8.125 inches in depth. The two equal-sized bowls each measure 13.5 inches in length by 16 inches in width with a usable depth of 7.75 inches, providing generous workspace for washing, soaking, and rinsing. The scratch-resistant surface finish supports routine cleaning and can be restored using a stainless steel restoration kit if deep scratches occur. Sound-deadening pads are factory-applied to reduce noise and vibration during use. Manufactured in the USA.

This sink is suited for residential kitchen remodels and new construction where a drop-in configuration is specified. The U-channel mounting system allows clips to be pre-positioned inside the channel before installation, reducing the need for extended under-sink access during fitting. Straight sidewalls create a flat-bottom bowl profile that maximizes usable stacking and soaking space. Each bowl drain is centered and sized at 3.5 inches in diameter, compatible with standard basket strainer hardware. A minimum cabinet cutout width of 36 inches is required for proper fit.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Equal-sized dual bowls, each 13.5 inches x 16 inches x 7.75 inches deep, for versatile task separation
• U-channel mounting system allows clips to be staged before under-sink work begins
• Factory-applied sound-deadening pads reduce operational noise and vibration
• Centered 3.5-inch drain openings in each bowl for effective drainage
• Flat-bottom straight-sidewall bowl design maximizes usable basin space
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchen base cabinets with a minimum interior width of 36 inches. No specific appliance or model compatibility was stated in the product data.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with local IPC requirements. Shut off the water supply and disconnect existing drain and supply lines before removing an existing sink or preparing the cutout. Use a jigsaw and manufacturer-supplied template or dimensions to make the countertop cutout; verify cabinet clearance before cutting. Apply plumber's putty or silicone sealant around the rim per the manufacturer's instructions before seating the sink, and torque mounting clips evenly without over-tightening to avoid distorting the countertop surface.