Bsc Preferred LR3122MR2 Single Bowl Drop-in Sink 31x22 in

Product Description

The BSC PREFERRED LR3122MR2 is a single bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 31 inches in length, 22 inches in width, and 7-5/8 inches in depth, with a bowl interior of 28 inches by 16 inches. The drop-in design uses a cutout dimension of 30-3/8 inches by 21-3/8 inches, fitting flush into standard countertop openings. A centered 3.5-inch drain opening supports efficient water drainage. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The sink is configured for 2-hole faucet mounting and ships at approximately 19 pounds. Manufactured in the USA.

This sink is suited for residential kitchens, prep areas, bars, and light commercial installations. The drop-in mount requires a minimum cabinet width of 36 inches, making it compatible with most standard kitchen base cabinet configurations. Straight sidewalls and a flat bottom maximize usable bowl space for washing, soaking, and stacking. The Lustertone finish is designed to be repairable — light surface scratches blend into the brushed texture over time, and deeper scratches can be addressed with a stainless steel restoration kit. This unit ships as a single sink with no additional accessories included.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Drop-in installation with a cutout dimension of 30-3/8 inches by 21-3/8 inches
• Sound-deadening pads bonded to underside to reduce vibration and ambient noise
• Repairable Lustertone finish — surface scratches blend naturally over time
• Centered 3.5-inch drain opening for efficient drainage
• 2-hole faucet configuration; requires minimum 36-inch base cabinet
• Made in the USA

Compatibility

Designed as a drop-in replacement or new installation for residential and light commercial kitchen sink applications requiring a 31-inch by 22-inch single bowl sink with a 30-3/8-inch by 21-3/8-inch countertop cutout and a minimum 36-inch base cabinet.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and IPC guidelines. Shut off the water supply and disconnect existing drain connections before beginning. Drop-in mounting typically requires a bead of silica-based sealant applied around the rim prior to setting the sink into the countertop cutout; follow the sink manufacturer documentation for clip placement and tightening sequence. Verify drain rough-in alignment and P-trap compatibility before completing the installation.