Bsc Preferred LR31221 Drop-in Kitchen Sink 31x22 Stainless

Product Description

The BSC PREFERRED LR31221 is a single-bowl drop-in kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 31 inches in length, 22 inches in width, and 7.625 inches in depth, providing ample room for washing, soaking, and stacking dishes. The rectangular bowl interior spans 28 inches by 16 inches with a 7.5-inch depth. A scratch-resistant, lustrous grain finish deflects light and conceals minor surface marks. Sound-deadening pads bonded to the underside reduce noise and vibration during everyday use. Installation uses U-channel mounting clips for a straightforward drop-in setup. A licensed plumber typically handles the final hookup and supply connections.

This sink is suited for residential kitchen installations requiring a drop-in configuration. The 1-hole layout accommodates a wide range of single-hole or deck-plate faucet styles. A minimum cabinet cutout of 36 inches is required to support the sink properly. The 3.5-inch drain opening is sized to accept most standard kitchen drain assemblies and basket strainers. Its stainless steel construction and contemporary rectangular profile work in both modern and traditional kitchen layouts. Manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Overall dimensions: 31 x 22 x 7.625 inches; interior bowl: 28 x 16 x 7.5 inches
• Scratch-resistant grain finish conceals light surface marks
• Sound-deadening pads reduce noise and vibration during use
• U-channel mounting clips simplify drop-in installation
• 1-hole faucet configuration; 3.5-inch drain opening compatible with standard drain fittings
• Requires a minimum 36-inch cabinet base for proper support

Compatibility

Compatible with most standard kitchen drain fittings using the 3.5-inch drain opening. Requires a minimum 36-inch base cabinet. The 1-hole deck configuration accepts most single-hole faucets or deck plates designed for wider spread faucets.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Shut off the water supply at the angle stops or main before beginning any sink swap. Apply a continuous bead of silicone sealant around the perimeter of the cutout before setting the sink to prevent water intrusion. Secure the U-channel mounting clips from below and do not overtighten to avoid distorting the sink flange or countertop material.