Bsc Preferred LR250L1 Double Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED LR250L1 is an 18-gauge Type 304 stainless steel double bowl drop-in kitchen sink built for heavy-use residential and light commercial kitchen environments. The sink measures 33 inches x 22 inches overall with a bowl depth of 7.875 inches and uses a 40/60 split bowl layout that separates washing and prep tasks without sacrificing counter space. The lustrous grain finish is scratch-resistant and designed to hold up under repeated daily use. Sound-deadening pads are bonded to the underside to reduce vibration and noise during operation. This sink is manufactured in the USA.

The LR250L1 is suited for residential kitchen installations where a drop-in configuration is required and a 36-inch or wider base cabinet is present. The 40/60 bowl split gives the installer and end user two distinct working zones: a smaller bowl measuring 13.5 inches x 16 inches and a larger bowl measuring 14 inches x 18 inches. A cutout template is included to simplify rough-in work. This sink fits into standard plumbing rough-in setups handled by licensed plumbers or experienced kitchen remodeling contractors.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and structural rigidity
• 40/60 split bowl design with two distinct basin sizes for multitask use
• Bowl depth of 7.875 inches accommodates large cookware
• Scratch-resistant lustrous grain finish that can be restored with a BSC PREFERRED restoration kit
• Sound-deadening pads bonded to underside reduce noise and vibration
• Drop-in installation with U-channel mounting clips and included cutout template
• Made in the USA

Compatibility

Designed for drop-in installation in kitchen base cabinets with a minimum width of 36 inches. Compatible with standard 3.5-inch drain assemblies at centered drain positions in each bowl.

Installation Notes

Installation should be performed by a licensed plumber or qualified contractor in accordance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. Use the included cutout template to mark and cut the countertop opening before lowering the sink into position. Secure with U-channel mounting clips from below the deck and apply a continuous bead of silicone sealant around the rim perimeter to prevent water infiltration.