Bsc Preferred LR1517MR2 Bar Sink 15x17.5 Drop-in

Product Description

The BSC PREFERRED LR1517MR2 is a single-bowl drop-in bar sink fabricated from 18-gauge Type 304 stainless steel with a Lustertone scratch-resistant finish. The sink measures 15 inches long by 17.5 inches wide, with a 12-inch by 12-inch square basin interior and a 7.625-inch depth. It ships at 9.75 pounds and requires a 3.5-inch drain opening. Sound-deadening pads bonded to the underside reduce vibration and noise during use. Licensed plumbers and experienced DIYers install this unit as a drop-in replacement or new installation in bar and prep countertop cutouts.

This sink is sized for bar, wet bar, and prep station applications in residential kitchens, home bars, and light commercial service areas. The single-bowl layout accommodates quick rinses, beverage prep, and light food preparation tasks. The U-channel mounting system positions mounting clips inside the channel rail, which reduces under-sink access requirements during installation. A minimum cabinet width of 18 inches is required to support the deck footprint.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Lustertone finish is scratch-resistant and minor surface marks blend into the finish over time
• Sound-deadening undercoating pads minimize vibration and water noise
• U-channel drop-in mounting system with clips seated inside the channel for simplified installation
• Single-bowl 12-inch by 12-inch basin with 7.625-inch depth handles bar and prep tasks
• Manufactured in the USA

Compatibility

Designed as a drop-in bar or prep sink for countertop installations requiring a minimum 18-inch cabinet width and a 3.5-inch drain opening cutout.

Installation Notes

Installation should be performed by a licensed plumber or qualified tradesperson in accordance with local plumbing code requirements. Shut off the water supply and disconnect any existing drain connections before beginning work. The countertop cutout dimensions must be verified against the sink rim footprint before setting the unit. Apply a continuous bead of silicone sealant along the rim perimeter before dropping the sink into the cutout, then secure the mounting clips from inside the U-channel rail.