Bsc Preferred LMR20131 Single Bowl Bar Sink Drop-in

Product Description

The BSC PREFERRED LMR20131 is a single bowl bar and prep sink constructed from 18-gauge Type 304 stainless steel. It measures 19.5 inches in length, 13 inches in width, and 6.125 inches in depth, with a bowl interior of 15.75 inches by 7.50 inches. The sink uses a drop-in installation method, seats into a standard countertop cutout, and requires a minimum cabinet width of 24 inches. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The drain opening measures 3.5 inches and is centered in the bowl. This sink is made in the USA and is ADA compliant when properly installed. Licensed plumbers and qualified tradespeople handle installation in both residential and light commercial applications.

This sink is suited for bar stations, prep areas, home wet bars, and light commercial counters where a compact single bowl unit is needed. The single faucet hole configuration accepts a standard deck-mount faucet. The repairable grain finish allows minor surface scratches to blend into the existing surface texture over time, reducing the need for refinishing. The center drain placement supports efficient drainage during high-volume use typical of bar and prep environments.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Drop-in installation with a minimum 24-inch cabinet requirement
• Sound-deadening pads bonded to underside to reduce vibration and noise
• Single faucet hole configuration for straightforward faucet pairing
• 3.5-inch center drain opening for efficient water flow
• ADA compliant when properly installed
• Made in the USA

Compatibility

Designed as a drop-in replacement or new installation for bar and prep sink applications requiring a 19.5 x 13-inch overall footprint with a minimum 24-inch cabinet width.

Installation Notes

Installation is performed by a licensed plumber following applicable IPC and local plumbing code requirements. Shut off the water supply and disconnect existing drain lines before beginning any sink replacement work. Use a compatible drop-in mounting clip kit and plumber-grade silicone sealant around the sink rim to ensure a watertight seal. Confirm the countertop cutout dimensions and cabinet clearance match the sink specifications before installation.