Bsc Preferred LK940VS07T6S Wall Mount Faucet 4.0 Gpm

Product Description

The BSC PREFERRED LK940VS07T6S is a wall-mount service and utility faucet built for commercial and institutional environments where durability and compliance are non-negotiable. It features an 8-inch centerset configuration, a 7-inch vented spout, and a high flow rate of 4.0 gallons per minute. The body is constructed from solid brass, and the quarter-turn ceramic disc valve delivers smooth, consistent operation over an extended service life. A spout swing restrictor pin locks the spout in a fixed position where stationary water access is required. This faucet is installed by licensed plumbers and meets ADA standards as well as NSF/ANSI 61 and 372 certifications for low lead content.

The LK940VS07T6S is designed for commercial kitchens, classrooms, janitorial rooms, and utility spaces where dependable hands-free or wristblade operation is required. The 6-inch wristblade handles allow easy use when hands are soiled or gloved, making this unit well suited for food service, handwashing stations, and general utility sink applications. The half-inch adjustable inlets include integral stops that allow water flow to be shut off at the faucet itself during maintenance, reducing the need to isolate the broader supply line. Two faucet holes are required for installation.

Key Features

• Solid brass construction rated for sustained commercial use
• Quarter-turn ceramic disc valve for smooth, long-lasting operation
• 7-inch vented spout with swing restrictor pin for fixed-position applications
• 6-inch wristblade handles for easy operation in demanding environments
• Half-inch adjustable inlets with integral stops for in-place maintenance shutoff
• ADA compliant and certified to NSF/ANSI 61 and 372 for low lead content

Compatibility

Designed as an OEM-style replacement or new-installation wall-mount faucet for commercial utility sinks requiring an 8-inch centerset, two-hole configuration.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing codes and IPC requirements. Shut off the water supply at the nearest isolation valve before beginning work. Verify that the wall or deck substrate can support a two-hole, 8-inch centerset mounting pattern before securing the unit. The integral stops on the inlets allow service without full supply shutoff, but always confirm no pressure is present before disconnecting lines.