Bsc Preferred ILR6622DD4 Double Bowl Drop-in Sink

Product Description

The BSC PREFERRED ILR6622DD4 is an 18-gauge Type 304 stainless steel drop-in kitchen sink with an equal double bowl configuration and an integrated drainboard. Each bowl measures 16 inches in length and width, delivering ample capacity for washing, soaking, and rinsing. The built-in drainboard channels water back into the sink, eliminating countertop pooling during pot drainage or dish drying. Straight sidewalls and a flat bottom simplify cleaning and maximize usable interior volume. Sound-deadening pads are factory-applied to reduce noise during operation. The sink is manufactured in the USA and carries a scratch-resistant finish that blends minor surface marks over time.

This sink is designed for drop-in installation in residential kitchen applications where a dual-basin layout with a dedicated drainboard is required. The U-channel mounting method uses integrated mounting clips, reducing time spent working underneath the cabinet during installation. Four pre-drilled faucet holes accommodate a range of faucet and accessory configurations. A minimum cabinet opening of 69 inches is required for proper fitment. The overall unit dimensions are 66 inches in length and 22 inches in width, with an item height of 7.625 inches, making cabinet clearance verification essential before installation.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and structural rigidity
• Equal double bowl configuration with each bowl at 16 inches by 16 inches
• Integrated drainboard channels water back into the sink basin
• U-channel drop-in installation with mounting clips for secure, low-effort setup
• Four faucet holes to support varied faucet and soap dispenser configurations
• Factory-applied sound-deadening pads for reduced operational noise
• Straight sidewalls and flat bottom for ease of cleaning

Compatibility

Designed as a drop-in replacement or new installation for residential kitchen countertop cutouts requiring a minimum cabinet width of 69 inches. Compatible with standard drain fittings and a wide range of deck-mount faucet configurations using the four pre-drilled faucet holes.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable IPC requirements and local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before beginning work. Verify countertop cutout dimensions and minimum cabinet width of 69 inches prior to drop-in placement. Apply a continuous bead of plumber's putty or silicone sealant around the perimeter before setting the sink, and secure using the provided U-channel mounting clips from below.