Bsc Preferred HW38A0750-16 Interior Satin Paint 1 Gal

Product Description

The BSC PREFERRED HW38A0750-16 is an interior satin latex paint formulated in a neutral base for use on walls, trim, and ceilings in demanding residential spaces. This water-based finish delivers a tough, washable surface that resists stains, grease, and spotting. It is sold by the gallon and applies with a brush or roller. Coverage runs approximately 400 square feet per gallon when applied at the recommended spread rate. The finish dries to the touch in 1 to 2 hours. Overnight drying is required before recoating. Application temperature must be above 55 degrees F. Do not thin this product.

This paint is suited for kitchens, bathrooms, trim work, and interior walls where a durable, cleanable finish is a priority. The neutral base accepts a wide range of tint formulations. Over 1000 custom colors are available through tinting, and the product is also offered in 4 pre-packaged colors. It is appropriate for residential repaint and new construction work handled by painting contractors or skilled trade professionals.

Key Features

• Satin finish resists stains, grease, and spotting for high-traffic interior areas
• Coverage up to 400 square feet per gallon at recommended spread rate
• Dries to touch in 1 to 2 hours; recoat after overnight drying
• Compatible with brush or roller application
• Neutral base accepts over 1000 custom tint colors
• Backed by a lifetime warranty

Compatibility

Designed for interior application on standard drywall, plaster, wood trim, and previously painted surfaces in residential and light commercial settings.

Installation Notes

Apply only when ambient and surface temperatures are above 55 degrees F. Do not thin this product. Stir thoroughly before use and between coats. Ensure adequate ventilation during application and drying. WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.