Bsc Preferred HW35W0803-16 Exterior Flat Paint 1 Gallon

Product Description

The BSC PREFERRED HW35W0803-16 is a flat exterior paint formulated with 100% acrylic resins for long-term durability on exterior building surfaces. It resists fading, peeling, and blistering through seasonal exposure and is designed to cover in a single coat when applied over properly prepared surfaces. Coverage runs approximately 400 square feet per gallon. The formula cleans up with soap and water and can be thinned slightly for spray application. Application is rated down to 35 degrees F, making it usable through cooler working seasons. Backed by a lifetime warranty, this product suits professional painters and contractors working on residential and light commercial exteriors.

This paint is suited for use on most exterior building surfaces including wood, masonry, stucco, and metal. Available in tint bases that can be mixed to over 1,000 custom colors. For new wood substrates, BSC PREFERRED recommends priming with a BSC PREFERRED latex or alkyd exterior wood primer before applying this topcoat. It applies by brush, roller, paint pad, or sprayer, making it compatible with standard contractor workflows on both small and large surfaces.

Key Features

• 100% acrylic resin formula resists fading, peeling, and blistering
• Single-coat coverage over properly prepared surfaces at approximately 400 sq ft per gallon
• Tint bases mixable to over 1,000 custom colors
• Low-temperature application rated down to 35 degrees F
• Compatible with brush, roller, paint pad, or sprayer application
• Soap and water cleanup; no solvents required
• Backed by a lifetime warranty

Compatibility

Suitable for use on most exterior building surfaces including wood, masonry, stucco, and metal. For new wood surfaces, use with a BSC PREFERRED latex or alkyd exterior wood primer as a base coat.

Installation Notes

Surface preparation is critical — clean, dry, and properly primed surfaces are required before application. Apply only when ambient and surface temperatures are at or above 35 degrees F and conditions are not expected to drop below that threshold within the drying window. Drying to touch occurs in approximately 2 hours; recoat time is 4 to 6 hours under normal conditions. Follow all local VOC regulations and applicable safety guidelines when applying or disposing of paint materials.