Bsc Preferred EVDFP-GL Flat Acrylic Latex Paint 1 Gallon

Product Description

The BSC PREFERRED EVDFP-GL is an interior and exterior flat acrylic latex paint formulated in a tintable white pastel base. It ships in a 1-gallon container and is designed for broad surface coverage across a wide range of residential and light commercial applications. The flat finish minimizes surface imperfections and delivers a matte appearance on walls and ceilings. VOC content is less than 50 grams per liter, keeping it compliant with many low-VOC project requirements. The non-spatter formula reduces mess during application, and the quick-dry characteristic shortens recoat wait times. Cleanup requires only soap and water, eliminating the need for solvents. Painting contractors, facilities maintenance crews, and experienced DIYers are the primary installers.

This paint is suited for both interior and exterior surfaces where a flat, low-sheen finish is specified. The pastel base accepts tinting, making it flexible for color-match work on walls, ceilings, trim backing coats, and general repaint projects. It performs in residential, multifamily, and light commercial facilities maintenance settings. The low-VOC formulation supports use in occupied or semi-occupied spaces where air quality is a concern. The 1-gallon size is practical for targeted touch-up work, accent walls, or smaller room applications where a 5-gallon pail would be excessive.

Key Features

• Flat acrylic latex finish suitable for both interior and exterior surfaces
• VOC content less than 50 grams per liter for low-emission compliance
• Non-spatter formula reduces overspray and drip during brush or roller application
• Quick-dry formulation shortens recoat intervals on the job
• Soap and water cleanup with no solvents required
• Tintable pastel base for flexible color matching

Compatibility

Designed as a general-purpose flat acrylic latex paint for use on properly prepared interior and exterior surfaces including drywall, plaster, wood, and masonry.

Installation Notes

Application should be performed by a qualified painter or facilities maintenance technician following surface preparation best practices including cleaning, patching, and priming bare or porous substrates. Stir thoroughly before use and apply within the temperature and humidity ranges recommended on the product label. Ensure adequate ventilation in interior spaces during application and drying. Do not apply to surfaces in direct contact with standing water or to surfaces not rated for latex-based coatings.