Bsc Preferred ER101Y Remote Chiller 10 Gph Two Station

Product Description

The BSC PREFERRED ER101Y is a remote chiller designed to convert standard drinking fountains into chilled water coolers for indoor use. The unit delivers 10 gallons per hour (GPH) of chilled water and supports two dispensing stations simultaneously. A hermetically sealed refrigeration system maintains consistent water temperature without requiring direct integration into the fountain housing. The refrigeration unit can be mounted up to 15 feet from the dispensing location, allowing flexible placement in mechanical rooms, utility closets, or adjacent wall spaces. Licensed plumbers or qualified HVAC technicians typically handle installation in permanent wired configurations.

This chiller is rated for indoor applications in high-demand environments including offices, schools, gymnasiums, and public facilities. The two-station capacity makes it practical for locations where multiple fountains share a single chilling source, reducing equipment redundancy. The unit ships as a single assembly rated for permanent hardwired installation, not portable or countertop use. NSF 372 certification confirms low lead content compliance, making it appropriate for installations subject to lead-reduction regulations in commercial and institutional buildings.

Key Features

• 10 GPH chilling capacity serves high-demand hydration loads
• Supports two dispensing stations from a single chiller unit
• Hermetically sealed refrigeration system for consistent chilled water output
• Remote mounting capability up to 15 feet from the dispensing point
• NSF 372 certified for low lead content compliance
• Fully enclosed design suitable for permanent wired indoor installations

Compatibility

Designed as a remote chiller for use with standard drinking fountains in two-station indoor configurations requiring a separately mounted refrigeration source.

Installation Notes

Installation should be performed by a licensed plumber or qualified HVAC technician familiar with refrigeration systems and local plumbing codes. Shut off the water supply and disconnect electrical power before making any connections to existing fountain or plumbing lines. The unit requires a permanent hardwired electrical connection and should not be connected to a standard plug-in outlet unless the circuit is rated for the equipment load. Verify local codes for refrigerant handling requirements if service or rework of the sealed system is needed.