Bsc Preferred ELUH3219 Double Bowl Undermount Kitchen Sink

Product Description

The BSC PREFERRED ELUH3219 is a double bowl undermount kitchen sink constructed from 18-gauge Type 304 stainless steel. It measures 32.25 inches long by 18.25 inches wide by 7.75 inches deep and uses a 30/70 bowl split, pairing a large rectangular primary bowl with a smaller secondary bowl. The reversible design allows the smaller bowl to be positioned on either the left or right side during installation, accommodating different kitchen layouts. Straight sidewalls produce a flat bottom in each bowl, maximizing usable depth for soaking, stacking, and washing. Sound-deadening pads on the sides and bottom reduce vibration and water noise during use. A licensed plumber typically handles the undermount installation and drain rough-in for this fixture.

The ELUH3219 is suited for residential and light commercial kitchen applications where an undermount configuration is specified. The large bowl handles oversized cookware, sheet pans, and batch washing, while the smaller Danish bowl stays free for food prep tasks. A minimum cabinet opening of 36 inches is required for proper installation. The center drain on each bowl accepts a standard 3.5-inch drain assembly and is compatible with standard garbage disposals where local codes permit. Country of origin is the United States.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance in daily-use environments
• Reversible 30/70 bowl split — smaller bowl installs left or right to suit cabinet layout
• Flat-bottom bowls with straight sidewalls maximize stacking and soaking capacity
• Sound-deadening pads on sides and bottom reduce impact noise and vibration
• 3.5-inch center drain opening on each bowl; compatible with standard garbage disposals
• Requires a minimum 36-inch cabinet for undermount installation
• Made in the USA

Compatibility

Designed as an undermount replacement or new-installation sink for standard 36-inch base cabinets with a cutout accommodating a 32.25-inch by 18.25-inch sink deck. Compatible with standard 3.5-inch drain assemblies and most residential garbage disposal units where applicable.

Installation Notes

Undermount sink installation requires securing the sink to the underside of the countertop using clips, epoxy, or mounting hardware per the countertop material manufacturer guidelines. Shut off the water supply and disconnect existing drain plumbing before beginning any removal or installation work. A licensed plumber should perform drain connection and any garbage disposal wiring must comply with applicable NEC and local code requirements. Verify the cabinet rough opening meets the 36-inch minimum before ordering the cutout.