Bsc Preferred ELUH1113DBG Undermount Kitchen Sink Kit

Product Description

The BSC PREFERRED ELUH1113DBG is an 18-gauge Type 304 stainless steel single bowl undermount kitchen sink sold as a complete kit. Designed for undermount installation, it integrates flush with the underside of the countertop to deliver a clean, seamless surface edge. The Danish-shaped bowl measures 14.25 inches in length, 15.75 inches in width, and 5.9375 inches in depth, providing adequate capacity for dishwashing and general kitchen tasks. A rear center drain placement shifts the drain away from the work zone, optimizing lower cabinet storage and maintaining compatibility with standard garbage disposal units. This kit ships with a bottom grid and drain assembly included.

This sink is suited for residential kitchen installations, either as a primary sink or in a dedicated prep area. The undermount configuration requires a solid-surface, laminate, or stone countertop that supports a cutout mount. A minimum cabinet width of 18 inches is required for proper fit. It carries ADA compliance, making it appropriate for accessible kitchen builds and renovations. Plumbers and general contractors performing kitchen remodels are the typical trade installers for this product.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Scratch-resistant finish maintains appearance under heavy daily use
• Sound-deadening pads on sides and bottom reduce vibration and noise during use
• Rear center drain placement maximizes usable cabinet space below
• Kit includes bottom grid and drain assembly, eliminating the need for separate accessory purchases
• ADA compliant for accessible kitchen applications

Compatibility

Designed for undermount installation in kitchen countertops requiring a minimum cabinet width of 18 inches. Compatible with standard garbage disposal connections where cabinet space allows.

Installation Notes

Installation is typically performed by a licensed plumber or experienced contractor. Power to any in-cabinet electrical components, including garbage disposals, must be shut off at the breaker before beginning work. The countertop cutout must conform to the sink manufacturer dimensions and the mounting surface must be fully supported around the perimeter of the cutout. Follow local plumbing code requirements for drain and supply connections.