Bsc Preferred ECTSRS33229TBG4 Stainless Steel Sink Kit

Product Description

The BSC PREFERRED ECTSRS33229TBG4 is a single-bowl stainless steel sink kit designed for kitchen installations requiring a drop-in or undermount configuration. Built from Type 304 stainless steel at 18-gauge thickness, the sink measures 33 inches x 22 inches with a 9-inch bowl depth, providing substantial capacity for large cookware and sheet pans. A full sound-deadening system with spray-applied side and bottom pads reduces operational noise. The rear-centered drain placement maximizes under-sink cabinet space. The kit ships with a CTXBG2915 bottom grid and all hardware needed for countertop installation. Licensed plumbers and experienced kitchen remodelers are the typical installers.

This sink kit is suited for residential kitchen remodels and new construction where a large-format, single-bowl sink is required. The slim, ultra-thin flat rim supports both drop-in and undermount installation methods, accommodating countertops ranging from 0.75 inches to 1.5 inches thick. A minimum cabinet width of 36 inches is required. The 3.5-inch drain opening is compatible with standard garbage disposals. The rectangular bowl features tight corners and a flat bottom, which simplifies cleaning and suits modern kitchen aesthetics.

Key Features

• Type 304 stainless steel construction at 18-gauge thickness for durability and corrosion resistance
• Single bowl measuring 30.5 inches x 16.75 inches with a 9-inch depth for high-capacity use
• Dual-install slim rim design supports drop-in or undermount mounting
• Full sound-deadening system with spray sides and bottom pads for reduced noise
• Rear-centered drain maximizes usable under-sink storage space
• Includes CTXBG2915 bottom grid and full installation hardware

Compatibility

Designed for countertop installations ranging from 0.75 inches to 1.5 inches thick, requiring a minimum 36-inch base cabinet. The 3.5-inch drain opening is compatible with standard garbage disposals. Includes the CTXBG2915 bottom grid accessory.

Installation Notes

Installation should be performed by a licensed plumber or qualified kitchen installer in accordance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain lines before removing any existing sink. Drop-in installations require a countertop cutout per the sink rim dimensions; undermount installations require adhesive and mounting clips rated for the countertop material. Verify cabinet and countertop thickness compatibility before beginning work.