Bsc Preferred ECTSRS33229TBG2 Kitchen Sink Kit 33x22

Product Description

The BSC PREFERRED ECTSRS33229TBG2 is an 18-gauge Type 304 stainless steel single bowl kitchen sink kit measuring 33 inches x 22 inches x 9 inches deep. The slim rim supports both drop-in and undermount installation methods, giving installers flexibility depending on the countertop and cabinet setup. Full spray sound deadening pads are bonded to the underside to reduce operational noise. A rear center drain placement keeps the area beneath the sink accessible for trap and disposal connections. The kit includes a CTXBG2915 bottom grid that protects the bowl surface and promotes drainage. Licensed plumbers and remodeling contractors are the primary installers for this type of fixture.

This sink is suited for residential kitchen remodels and new construction where a 36-inch minimum base cabinet is available. The flat bottom and tight corner geometry maximize usable bowl volume, accommodating large cookware such as stockpots and sheet pans. The offset drain position and 3.5-inch drain opening support standard garbage disposals where space permits. The 18-gauge steel construction and factory finish are appropriate for high-use residential kitchen environments.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Slim rim design supports drop-in or undermount installation
• Rear center drain placement maximizes under-sink cabinet space
• Full spray sound deadening pads reduce basin noise during use
• Flat bottom and tight corners maximize usable bowl volume
• Includes CTXBG2915 bottom grid for scratch protection and improved drainage
• 3.5-inch drain opening accommodates standard garbage disposal flanges

Compatibility

Designed for installation in base cabinets with a minimum 36-inch width. Supports standard 3.5-inch drain assemblies and is compatible with standard garbage disposals where sufficient clearance exists beneath the sink. Accepts both drop-in and undermount mounting configurations.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before beginning removal of any existing sink. Verify cabinet dimensions and countertop cutout requirements before securing the sink. For undermount installations, confirm that the countertop material and adhesive method are rated for the sink weight of 27 pounds.