Bsc Preferred ECTSRAD33226TBG5 Double Bowl Sink Kit

Product Description

The BSC PREFERRED ECTSRAD33226TBG5 is an 18-gauge Type 304 stainless steel double bowl kitchen sink kit designed for drop-in or undermount installation in residential kitchens. Both bowls feature a rectangular profile with flat bottoms and tight corners, maximizing usable wash space. Full spray sound-deadening pads and undercoating reduce operational noise during use. The kit ships with bottom grids, mounting hardware, and a five-hole faucet deck, giving installers everything needed for a complete rough-in. Licensed plumbers and skilled remodelers handle this installation as part of a standard kitchen fixture rough-in or replacement project.

This sink kit is suited for residential kitchen countertop installations requiring a 36-inch minimum base cabinet. The slim rim design integrates cleanly with laminate, stone, and solid-surface countertops whether set as a drop-in or undermount configuration. Each bowl measures 14.75 inches in length and 16.75 inches in width, providing equal-capacity basins for washing, soaking, and rinsing. The drain openings are sized for compatibility with standard garbage disposals, supporting typical residential waste management setups. The five pre-drilled faucet holes accept most standard deck-mount faucet configurations.

Key Features

• 18-gauge Type 304 stainless steel construction resists dents, scratches, and corrosion
• Full spray sound-deadening pads and undercoating reduce sink noise during use
• Dual equal-sized bowls — each 14.75 inches by 16.75 inches — maximize usable basin space
• Slim rim design supports both drop-in and undermount installation methods
• Five pre-drilled faucet holes accommodate a wide range of deck-mount faucet styles
• U-channel mounting clips included for straightforward drop-in securing
• Bottom grids included to protect the sink surface from scratching and impact

Compatibility

Designed for drop-in or undermount installation in residential kitchen countertops requiring a minimum 36-inch base cabinet. Drain openings are compatible with standard garbage disposal units.

Installation Notes

Installation should be performed by a licensed plumber or qualified installer following local plumbing codes. Shut off the water supply and disconnect existing drain and supply lines before removing an existing sink. Drop-in installation uses the included U-channel mounting clips seated inside the channel rim; undermount installations require adhesive and mechanical fasteners appropriate for the countertop material. Confirm countertop cutout dimensions against the sink's outer footprint before cutting.