Bsc Preferred ECTSRAD33226TBG2 Dual Mount Ada Sink Kit

Product Description

The BSC PREFERRED ECTSRAD33226TBG2 is an 18-gauge stainless steel dual mount kitchen sink kit designed for ADA-compliant installations in residential and light commercial settings. The kit includes a double-bowl sink with two equal-sized basins, each measuring 14.75 inches in length, 16.75 inches in width, and 6 inches deep. Each bowl features a rear center drain opening sized for a 3.5-inch drain. Sound-deadening spray pads on the sides and bottom reduce water noise during use. The slim rim profile supports both drop-in and undermount installation, and the included bottom grids and mounting hardware complete the kit. Licensed plumbers and skilled tradespeople perform the typical install.

This sink kit is intended for residential and commercial kitchen applications where ADA accessibility compliance is required. The dual equal-bowl configuration suits high-use settings such as busy household kitchens or accessible kitchens in commercial buildouts. The sink requires a minimum cabinet width of 36 inches. Countertop cutout dimensions are 32-3/8 inches by 21-3/8 inches with a 1/2-inch corner radius. Included hardware accommodates countertops up to 1-1/2 inches thick. The U-channel mounting system is designed to simplify alignment and reduce time spent working underneath the cabinet during installation.

Key Features

• 18-gauge stainless steel construction for durability and corrosion resistance
• Two equal bowls each 14.75 inches by 16.75 inches by 6 inches deep
• Rear center drain openings accept standard 3.5-inch drain fittings
• Full spray pads on sides and bottom provide sound-deadening performance
• Slim rim design supports both drop-in and undermount installation methods
• ADA compliant when installed per applicable guidelines
• Includes CTXBG1315 bottom grids and mounting hardware for countertops up to 1-1/2 inches thick

Compatibility

Designed for installation in base cabinets with a minimum 36-inch width. Compatible with countertops up to 1-1/2 inches thick. Cutout dimensions are 32-3/8 inches by 21-3/8 inches with a 1/2-inch corner radius. Accepts standard 3.5-inch kitchen drain fittings.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Shut off the water supply and disconnect existing drain connections before beginning sink removal or replacement. Use the included U-channel hardware and follow the manufacturer instructions for proper drop-in or undermount seating. Verify ADA mounting height requirements per the applicable accessibility standard before finalizing the countertop cutout position.