Bsc Preferred ECTSR15159TBG2 Bar Sink Kit 15x15x9

Product Description

The BSC PREFERRED ECTSR15159TBG2 is a dual mount bar and prep sink kit constructed from Type 304 stainless steel at 18-gauge thickness. The single rectangular bowl measures 12.5 inches in length, 9.75 inches in width, and 9 inches in depth, providing substantial capacity for a compact footprint. Tight corners and a flat bottom maximize usable bowl space and simplify cleaning. SoundGuard technology applies full spray insulation to the sides and bottom of the sink to reduce operational noise. The kit ships complete with the CTXBG118 bottom grid and sound-deadening pads, making it a ready-to-install package for licensed plumbers and experienced finish contractors.

This sink is sized for bar stations, prep areas, and secondary kitchen installations where counter space is limited but functional depth is required. The overall sink dimensions are 15 inches by 15 inches by 9 inches, with a minimum cabinet requirement of 18 inches. The slim rim profile supports both drop-in and undermount installation methods, giving the installer flexibility based on countertop material and client preference. The 3.5-inch drain opening is compatible with standard garbage disposals, making it suitable for wet bar and light food-prep applications in residential and light commercial settings.

Key Features

• Type 304 stainless steel construction at 18-gauge thickness for corrosion resistance and durability
• Single bowl with tight corners and flat bottom for maximized usable space and easier cleaning
• Dual mount design supports drop-in or undermount installation from a single unit
• SoundGuard full spray insulation on sides and bottom reduces sink noise during use
• Includes CTXBG118 bottom grid to protect sink surface and promote drainage
• 3.5-inch drain opening compatible with standard garbage disposals

Compatibility

Designed for drop-in or undermount installation in cabinets with a minimum 18-inch base. The 3.5-inch drain opening is compatible with standard garbage disposal units. Includes the CTXBG118 bottom grid as a matched accessory component.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable IPC and local plumbing code requirements. Shut off the water supply and disconnect any existing drain lines before beginning sink replacement or new installation. For undermount applications, verify that the countertop material and adhesive method are rated to support the sink weight of 13 pounds before securing. Drop-in installation requires a properly sized cutout with adequate clearance for the rim seal and mounting clips per the manufacturer template.