Bsc Preferred ECTSR15159TBG1 Bar Sink Kit 15x15x9

Product Description

The BSC PREFERRED ECTSR15159TBG1 is an 18-gauge Type 304 stainless steel bar sink kit designed for home bar installations, prep areas, and compact kitchen spaces. The single-bowl sink measures 15 inches by 15 inches with a 9-inch depth overall, featuring a rectangular bowl with tight corners and a flat bottom that maximizes usable capacity and simplifies cleaning. Full spray sound-deadening pads and undercoating are applied to the exterior to reduce water noise and vibration. The kit ships with a CTXBG118 bottom grid included. This product is intended for installation by licensed plumbers or experienced trades.

The ECTSR15159TBG1 is suited for residential bar areas, entertainment spaces, and prep stations where counter space is limited. The slim rim profile supports both drop-in and undermount installation configurations, giving installers flexibility depending on the countertop material and cabinet layout. A minimum cabinet cutout width of 18 inches is required. The standard 3.5-inch drain opening is compatible with most garbage disposal flanges and basket strainer assemblies.

Key Features

• 18-gauge Type 304 stainless steel construction with polished finish
• Single-bowl interior measuring 12.5 inches in length and 9.75 inches in width
• Slim rim design supports both drop-in and undermount installations
• Full spray sound-deadening pads and undercoating applied to sink exterior
• Standard 3.5-inch drain opening compatible with garbage disposals
• Includes CTXBG118 bottom grid for surface protection and dish management

Compatibility

Designed for use with standard 3.5-inch drain assemblies and garbage disposal flanges. Requires a minimum cabinet width of 18 inches. Compatible with both drop-in and undermount countertop configurations as stated by the manufacturer.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Shut off the water supply and disconnect drain lines before removing an existing sink or beginning rough-in work. Verify countertop thickness and cabinet dimensions against the sink rim profile prior to cutting. Silicone sealant rated for kitchen use should be applied at the rim for drop-in installs; follow undermount clip and bracket requirements for undermount configurations.