Bsc Preferred ECTRUF30179R Farmhouse Kitchen Sink Single Bowl

Product Description

The BSC PREFERRED ECTRUF30179R is an 18-gauge Type 304 stainless steel farmhouse sink with a single bowl and apron front design. It measures 35.875 inches in length, 20.25 inches in width, and 9 inches in depth, with a usable bowl interior of 30 inches long by 17 inches wide by 9 inches deep. The sink features full-coverage spray undercoating and strategically placed sound-deadening pads on the sides and bottom, significantly reducing basin noise during use. Tight corner geometry and a flat bottom improve interior usability and simplify cleaning. Creased accent lines at the bowl base promote drainage and contribute to the sink's geometric aesthetic. Licensed plumbers and experienced kitchen remodelers install this type of unit.

This farmhouse sink is suited for residential kitchen installations where an apron-front, single-bowl configuration is required. The offset drain placement maximizes usable basin space and allows for greater cabinet clearance below, which can accommodate larger drain assemblies or garbage disposal units. A minimum cabinet opening of 36 inches is required for proper fit. The sink is compatible with standard garbage disposal systems where conditions permit. Its deep 9-inch bowl handles large stockpots, roasting pans, and high-volume dishwashing tasks common in active home kitchens.

Key Features

• 18-gauge Type 304 stainless steel construction resists dents, scratches, and corrosion
• Full spray undercoating and sound-deadening pads on sides and bottom reduce basin noise
• 9-inch bowl depth accommodates large cookware and high-volume use
• Offset drain placement maximizes bottom basin space and under-sink storage clearance
• Tight corners and flat bowl bottom simplify cleaning and improve usability
• Compatible with standard garbage disposal systems where installation conditions allow

Compatibility

Requires a minimum 36-inch cabinet opening for installation. Compatible with standard garbage disposal systems where conditions permit. Designed for apron-front farmhouse sink applications in residential kitchen cabinetry.

Installation Notes

This sink should be installed by a licensed plumber in accordance with applicable local plumbing codes and the International Plumbing Code (IPC). Shut off the water supply and disconnect all drain and supply lines before removing any existing sink. Verify cabinet rough opening dimensions meet the 36-inch minimum requirement before setting the sink. Do not overtighten mounting hardware or drain fittings, as this can distort the stainless steel basin or compromise the seal.