Bsc Preferred DRKR2522R2 Drop-in Sink 25x22 Stainless

Product Description

The BSC PREFERRED DRKR2522R2 is an 18-gauge Type 304 stainless steel single-bowl drop-in sink designed for high-traffic, heavy-use installations. It measures 25 inches in length, 22 inches in width, and 7.625 inches in depth, with a usable interior bowl of 19 inches by 16 inches at 7.5 inches deep. The polished finish is scratch-resistant and repairable, meaning minor surface abrasions blend into the finish over time. A 3.5-inch center drain accepts standard garbage disposals. Sound-deadening pads are factory-applied to the underside to reduce noise and vibration during use. Manufactured in the USA, this sink is built to withstand the demands of institutional and utility environments. Licensed plumbers and facilities maintenance professionals typically handle installation.

This sink is suited for classrooms, school kitchens, utility rooms, break rooms, and similar institutional or commercial environments that require a durable, cleanable work surface. The drop-in design seats into a standard countertop cutout of 24.375 inches by 21.375 inches and requires a minimum cabinet width of 30 inches. U-channel mounting clips are included to secure the sink from below, eliminating the need for specialized under-counter hardware. The single rectangular bowl provides generous workspace for washing, food prep, and general cleaning tasks in facilities that see continuous daily use.

Key Features

• 18-gauge Type 304 stainless steel construction for long-term corrosion resistance
• Repairable polished finish blends minor abrasions over time
• 3.5-inch center drain compatible with standard garbage disposals
• Factory-applied sound-deadening pads reduce noise and vibration
• U-channel mounting clips included for straightforward drop-in installation
• Made in the USA

Compatibility

Designed as a drop-in replacement or new installation for countertops requiring a cutout of 24.375 inches by 21.375 inches with a minimum cabinet width of 30 inches, typical of standard utility and institutional sink applications.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and disconnect any existing drain connections before removing a previous sink. Apply a continuous bead of plumber's putty or silicone sealant around the cutout perimeter before dropping the sink into place, then secure with the provided U-channel mounting clips from below. Do not overtighten the mounting clips, as this can distort the rim flange against the countertop surface.