Bsc Preferred DLR4322105 Drop-in Kitchen Sink Double Bowl

Product Description

The BSC PREFERRED DLR4322105 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential kitchen installations. It measures 43 inches long by 22 inches wide by 10.125 inches deep and features two equal rectangular bowls, each 19 inches long and 16 inches wide. The extra-deep bowls have straight sidewalls and flat bottoms, giving plumbers and kitchen installers a straightforward drop-in mount into a minimum 48-inch base cabinet. Sound-deadening pads on the sides and bottom reduce vibration and noise during use. The repairable satin finish resists heavy-duty wear and blends minor surface scratches over time. Made in the USA.

This sink is suited for residential kitchen remodels and new construction where a double-bowl layout is needed for simultaneous washing and rinsing tasks. The flat-bottom, straight-sidewall bowls accommodate large stockpots and full-size baking sheets. The U-channel rim design allows mounting clips to be set inside the channel prior to installation, reducing the time a plumber must spend working in the cabinet below. The 3.5-inch drain opening is compatible with standard garbage disposal flanges and most drain basket assemblies commonly used in residential plumbing.

Key Features

• 18-gauge Type 304 stainless steel construction for long-term corrosion resistance
• Two equal bowls, each 19 inches long by 16 inches wide by 10.125 inches deep
• Sound-deadening pads on sides and bottom reduce noise and vibration
• U-channel rim allows mounting clips to be pre-positioned before installation
• Standard 3.5-inch drain opening compatible with most garbage disposals and drain baskets
• Repairable satin finish blends light surface scratches over time
• Manufactured in the USA

Compatibility

Designed as a drop-in replacement or new-installation sink for residential kitchens with a minimum 48-inch base cabinet. The 3.5-inch drain opening is compatible with most standard garbage disposal flanges and drain basket assemblies.

Installation Notes

Installation is performed by a licensed plumber or qualified kitchen installer. Shut off the water supply and disconnect drain lines before removing any existing sink. Apply a continuous bead of silicone sealant around the underside of the rim before setting the sink into the countertop cutout, then tighten mounting clips evenly to avoid distorting the rim. Verify the drain rough-in and supply connections comply with local plumbing code requirements before final connection.