Bsc Preferred DLR3722100 Double Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED DLR3722100 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential and light commercial kitchen installations. It features two equal square bowls, each measuring 16 x 16 inches with a 10-inch depth, providing substantial capacity for washing, soaking, and rinsing simultaneously. The overall sink dimensions are 37 x 22 x 10.125 inches. Built from Type 304 stainless steel at 18-gauge thickness, the sink balances corrosion resistance with structural rigidity. Sound-deadening pads are factory-applied to reduce noise and vibration during use. This sink is installed by plumbers and kitchen remodelers as part of a new build or renovation.

The DLR3722100 is suited for residential kitchen countertop installations and light commercial kitchens requiring a drop-in configuration. The U-channel mounting system simplifies drop-in installation and reduces setup time. The flat-bottom, straight-sidewall bowl geometry makes stacking dishes and managing large cookware more practical. A minimum cabinet width of 42 inches is required. The 3.5-inch drain openings are sized to accept standard garbage disposal flanges and drain assemblies without modification.

Key Features

• Two equal square bowls, each 16 x 16 inches with 10-inch depth for high-capacity multitasking
• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Scratch-resistant finish with the ability to buff out light surface marks over time
• Factory-applied sound-deadening pads reduce operational noise and vibration
• U-channel drop-in mounting system for simplified countertop installation
• 3.5-inch drain openings compatible with standard garbage disposal flanges
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-install sink for kitchen countertops with a minimum cabinet width of 42 inches. Drain openings accept standard 3.5-inch garbage disposal and basket strainer assemblies.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and IPC guidelines. Shut off the water supply and disconnect existing drain and supply lines before removing any existing sink. The countertop cutout must match the sink rim dimensions and support the full weight of the sink; verify countertop material compatibility before cutting. Apply a continuous bead of silicone sealant around the perimeter of the sink rim before seating to ensure a watertight installation.