Bsc Preferred DLR312212MR2 Single Bowl Drop-in Kitchen Sink

Product Description

The BSC PREFERRED DLR312212MR2 is an 18-gauge Type 304 stainless steel single bowl drop-in kitchen sink measuring 31 x 22 x 11.625 inches overall, with a bowl interior of 28 x 16 inches. The deep basin accommodates large pots, sheet pans, and commercial-volume prep work. A center drain measuring 3.5 inches is sized for standard garbage disposals. Bottom-only sound-deadening pads reduce vibration and noise during high-flow rinsing. The repairable satin finish resists surface scratching, and minor abrasions blend into the grain over time. Deeper damage can be addressed with a standard stainless steel restoration kit. Made in the USA.

This sink is suited for residential kitchen installations where a drop-in configuration is required. The U-channel mounting clip system secures the sink from below the countertop deck, reducing the need for additional hardware during rough-in. The 11.625-inch bowl depth supports extended soak cycles and large-vessel washing. The 3.5-inch center drain position is consistent with standard residential rough-in drain locations. Plumbers and remodeling contractors working on kitchen renovation or new construction projects will find the mounting system straightforward to work with from below the deck.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long service life
• Drop-in installation with U-channel mounting clips for underdeck securing without additional hardware
• 11.625-inch bowl depth accommodates large cookware and extended soak loads
• 3.5-inch center drain sized for standard garbage disposal flanges
• Bottom-only sound-deadening pads reduce vibration and operational noise
• Repairable satin finish — light scratches blend into grain; deeper scratches addressable with a restoration kit
• Made in the USA

Compatibility

Designed as a drop-in replacement or new-install kitchen sink for standard 22-inch-depth countertop cutouts in residential applications. The 3.5-inch center drain is compatible with standard garbage disposal flanges and residential drain assemblies.

Installation Notes

Installation is performed by a licensed plumber or qualified remodeling contractor. Shut off the water supply and disconnect existing drain and supply lines before beginning removal of any existing sink. The drop-in format requires a countertop cutout sized to the manufacturer specification; U-channel clips are tightened from below the deck to secure the rim. Apply a continuous bead of plumber-grade silicone sealant around the underside of the rim flange before setting the sink into the cutout, and verify drain alignment before final clip tightening.