Bsc Preferred DLR2522121 Drop-in Kitchen Sink Stainless

Product Description

The BSC PREFERRED DLR2522121 is a drop-in single-bowl kitchen sink constructed from 18-gauge Type 304 stainless steel with a lustrous finish. Measuring 25 inches in length, 22 inches in width, and 12.125 inches in depth, it provides a spacious interior suited for washing large cookware, stacking dishes, and general food prep. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The finish is repairable, and a restoration kit is available from BSC PREFERRED to address surface wear over time. Licensed plumbers and experienced installers handle the standard drop-in installation.

The DLR2522121 is well suited for residential kitchens in both new construction and remodel applications. The single-bowl configuration accommodates large pots and sheet pans, making it practical for primary kitchen duty or a dedicated prep station. The U-channel mounting design positions the hardware clips inside the channel for easier clip access during installation. The drain opening is 3.5 inches in diameter, which aligns with standard garbage disposal flanges and drain assemblies.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and durability
• 25 x 22 x 12.125 inch overall dimensions with a deep single-bowl interior
• Interior bowl dimensions: 21 inches in length, 15.75 inches in width
• Sound-deadening pads reduce noise and vibration at the basin
• U-channel mounting system allows clip access from inside the channel
• 3.5-inch drain opening is compatible with standard garbage disposal flanges
• Repairable lustrous finish; restoration kit available from manufacturer
• Made in the USA

Compatibility

The 3.5-inch drain opening is compatible with standard garbage disposal flanges and typical kitchen drain assemblies. The drop-in configuration fits standard countertop cutouts sized to accommodate a 25 x 22 inch sink.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes. Before beginning work, shut off the water supply valves and disconnect the drain assembly and any existing disposal. The U-channel clip system secures the sink to the countertop from below; verify the countertop material and cutout dimensions before setting the sink. Apply a continuous bead of silicone sealant around the perimeter of the cutout before drop-in placement, and allow adequate cure time before restoring water supply.