Bsc Preferred DLR2222104 Drop-in Kitchen Sink 22x22

Product Description

The BSC PREFERRED DLR2222104 is an 18-gauge Type 304 stainless steel drop-in kitchen sink designed for residential kitchen installation by licensed plumbers and skilled trade professionals. The single-bowl configuration measures 19 inches in length by 16 inches in width with a depth of 10.125 inches, providing ample capacity for large pots, baking sheets, and heavy daily dishwashing loads. The straight sidewall design delivers a flat bottom surface that maximizes usable basin volume. Sound-deadening pads are bonded to the underside to reduce vibration and noise during use. The lustrous grain finish minimizes the appearance of light surface scratches over time, keeping maintenance demands low.

This sink is intended for residential kitchen installations where a drop-in configuration is required. The overall dimensions of 22 inches by 22 inches suit countertops with a minimum cabinet size of 27 inches. The countertop cutout dimension is 21.375 inches by 21.375 inches, with a 1.5-inch corner radius. The 4-hole configuration accommodates most standard faucet and accessory layouts. The 3.5-inch drain opening is sized for standard garbage disposal systems, making this model disposal-ready out of the box. The part is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for long-term corrosion resistance
• Single bowl interior: 19 inches long by 16 inches wide by 10.125 inches deep
• Straight sidewall design maximizes basin capacity and provides a flat working bottom
• Sound-deadening pads bonded to underside reduce operational noise and vibration
• U-channel mounting clips allow pre-positioning before final installation, reducing under-sink labor time
• Disposal-ready 3.5-inch drain opening compatible with standard garbage disposal systems
• 4-hole faucet configuration for broad accessory compatibility

Compatibility

Designed as a drop-in replacement or new installation sink for residential kitchen countertops requiring a 21.375-inch by 21.375-inch cutout with a 1.5-inch corner radius and a minimum base cabinet width of 27 inches.

Installation Notes

Installation should be performed by a licensed plumber in accordance with local plumbing code requirements and the International Plumbing Code (IPC) where adopted. Shut off the water supply and disconnect drain lines completely before beginning any sink removal or installation work. Apply a continuous bead of plumber's putty or silicone sealant around the cutout perimeter as required by the countertop material and manufacturer guidance. Secure U-channel mounting clips evenly around the sink perimeter before tightening to ensure a consistent seal against the countertop deck.