Bsc Preferred BLR15602 Bar Sink 15x15 Drop-in Stainless

Product Description

The BSC PREFERRED BLR15602 is a single-bowl drop-in bar sink fabricated from 18-gauge Type 304 stainless steel. The rectangular bowl measures 15 inches by 15 inches with a basin depth of 6.125 inches, providing a compact but functional wash area suited for bar prep, beverage service, and light food prep. Two faucet holes are pre-cut into the deck, accommodating standard faucet and accessory configurations. Sound-deadening pads are applied to the underside to reduce basin noise during use. The unit weighs 8 pounds and is ADA compliant. Installation is drop-in style, requiring a minimum cabinet size of 18 inches. Licensed plumbers and qualified contractors are the typical installers for this type of fixture.

The BLR15602 is designed for drop-in installation in bar counters, prep stations, and entertainment areas in both residential and light commercial settings. Its compact 15-inch by 15-inch footprint makes it a practical choice where counter space is limited but a dedicated sink is required. The ADA-compliant design makes it suitable for accessible bar and prep installations. A center drain configuration supports efficient drainage in standard sink drain assemblies. The sink is manufactured in the USA.

Key Features

• 18-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Single rectangular bowl: 15 inches wide by 15 inches long by 6.125 inches deep
• Drop-in installation with a minimum cabinet size requirement of 18 inches
• Two pre-cut faucet holes for flexible faucet and accessory mounting
• Center drain opening for efficient water flow
• Sound-deadening pads on the underside for reduced basin noise
• ADA compliant and made in the USA

Compatibility

Designed as an OEM-style drop-in replacement or new installation sink for residential bar areas and commercial prep counters requiring a 15-inch by 15-inch single-bowl drop-in configuration with a minimum 18-inch cabinet width.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and the IPC. Power down any under-counter electrical components and shut off the water supply before beginning work. Use an appropriate silicone sealant or mounting clips as specified by the installation instructions to secure the sink to the countertop cutout. Verify drain alignment and connection integrity before restoring water supply.