Bsc Preferred BCR150 Drop-in Bar Sink 15x15 Stainless

Product Description

The BSC PREFERRED BCR150 is a single bowl drop-in bar sink constructed from 20-gauge Type 304 stainless steel, designed for installation in bar areas, prep stations, and entertainment spaces. The rectangular bowl measures 12 inches in length and 10 inches in width with a 6-inch depth, providing adequate capacity for prep tasks. Overall sink dimensions are 15 inches x 15 inches x 6.125 inches. A center drain placement promotes efficient water drainage, while factory-applied sound-deadening pads on the bowl exterior reduce vibration and noise during use. Licensed plumbers and finish carpenters typically handle installation of this fixture type.

The BCR150 suits residential and light commercial applications where a compact, functional sink is required at a bar, wet bar, island prep station, or secondary kitchen area. The drop-in mounting method integrates with standard countertop cutouts. Included hardware is compatible with countertops up to 0.75 inches thick. A u-channel installation design reduces the amount of time required working beneath the countertop during setup. When installed in accordance with manufacturer guidelines and applicable plumbing codes, this sink meets ADA compliance standards.

Key Features

• 20-gauge Type 304 stainless steel construction for corrosion resistance and long-term durability
• Single bowl rectangular design with 12-inch x 10-inch bowl footprint and 6-inch depth
• Center drain location for efficient water management
• Sound-deadening pads on bowl underside to minimize noise and vibration
• Drop-in installation compatible with countertops up to 0.75 inches thick
• U-channel design reduces under-counter installation time
• ADA compliant when installed per applicable guidelines

Compatibility

Designed as a drop-in replacement or new-installation bar sink for countertops up to 0.75 inches thick in residential or light commercial bar and prep area applications.

Installation Notes

Installation is typically performed by a licensed plumber in accordance with the International Plumbing Code and local amendments. Shut off the water supply and confirm countertop thickness does not exceed 0.75 inches before beginning the cutout. Apply a continuous bead of plumber's putty or silicone sealant around the sink rim before setting the fixture into the cutout. Connect the drain assembly and supply lines only after the sink is fully seated and clips are secured.