Bsc Preferred 758086 Drywall Screw 6x1-5/8 Inch 5 Lb Box

Product Description

The BSC PREFERRED 758086 is a coarse-thread bugle-head drywall screw sold in a 5-pound box. The screw measures No. 6 in diameter by 1-5/8 inches in length and features a sharp point designed to pierce drywall and substrate without pre-drilling. The No. 2 Phillips recess drive makes installation fast with a standard power screwdriver. The hardened steel construction results from carbon steel subjected to heat treatment, quenching, and further reheating, producing a fastener that resists wear, corrosion, and abrasion. A phosphate finish provides additional surface protection. These screws are intended for interior applications and are installed by drywall hangers, carpenters, and general contractors.

The 758086 is suited for attaching drywall panels to wood studs, as well as fastening plywood, composition board, and softwood in interior framing and finish work. The coarse thread delivers strong pullout resistance in wood-based substrates. The bugle head profile allows the screw to seat flush or just below the drywall surface without tearing the paper face, which is essential for a smooth finish coat. The 5-pound box format supports production drywall hanging where bulk quantities reduce job-site downtime.

Key Features

• No. 6 x 1-5/8 inch coarse-thread design for wood-based substrates
• Sharp point penetrates drywall and softwood without pre-drilling
• Bugle head seats flush without tearing drywall face paper
• No. 2 Phillips recess drive compatible with standard drywall screw guns
• Hardened steel construction for wear, corrosion, and abrasion resistance
• Phosphate finish rated for interior use

Compatibility

Designed for interior use attaching drywall to wood studs and for general fastening of plywood, composition board, and softwood.

Installation Notes

Installation is performed by drywall hangers and carpenters using a drywall screw gun or drill driver set to a depth-sensitive clutch. Drive the screw until the bugle head dimples the drywall surface slightly without breaking the face paper. These screws are intended for interior use only and are not rated for exterior or treated-lumber applications. Follow local building codes for fastener spacing when hanging drywall assemblies.