Bryant RR450F 50A 125/250V 14-50R Power Receptacle

Product Description

The BRYANT RR450F is a flush-mount power receptacle rated for 50 amps at 125/250 volts, configured to the NEMA 14-50R standard. It features a 3-pole, 4-wire grounding design built for heavy-draw appliance circuits in residential and light commercial wiring applications. The thermoplastic body is finished in black and carries both UL and CSA approvals. Electricians install this receptacle on dedicated 50-amp branch circuits where a single grounding outlet is required at the point of use. Its surface-compatible flush mounting fits standard outlet boxes used in these installations.

The RR450F is suited for dedicated appliance circuits serving single electric dryers and single electric ranges. These circuits require a 4-wire grounding connection per current NEC guidelines for new installations. The 14-50R configuration is the standard NEMA designation for 50-amp, 125/250-volt grounding receptacles, making this part a direct fit for new rough-in work or receptacle replacement on existing 50-amp circuits in kitchens, laundry rooms, and utility areas.

Key Features

• NEMA 14-50R configuration rated at 50 amps and 125/250 volts
• 3-pole, 4-wire grounding design meets NEC requirements for new dryer and range circuits
• Thermoplastic construction resists impact and heat in appliance installation environments
• Flush-mount design fits standard outlet boxes for clean, code-compliant installations
• UL and CSA listed for use in residential and light commercial electrical systems
• Black finish matches standard wiring device cover plates

Compatibility

Designed as an OEM-style replacement or new-installation receptacle for 50-amp, 125/250-volt NEMA 14-50R dedicated appliance circuits in residential and light commercial applications.

Installation Notes

Installation should be performed by a licensed electrician in accordance with the NEC and applicable local codes. Always shut off the branch circuit breaker and verify the circuit is de-energized with a meter before beginning work. The 14-50R receptacle requires a dedicated 50-amp, 4-wire circuit; do not install on a shared or undersized circuit. Confirm box fill calculations and cover plate compatibility before final trim-out.