Browning 2722597 Roller Chain 80 Trade 1 Inch Pitch 10 Ft

Product Description

The BROWNING 2722597 is a standard riveted single-strand roller chain built to ANSI B29.1 specifications. It carries an ANSI trade size of 80 with a 1-inch pitch and is supplied in a 10-foot length. The chain features a 0.625-inch roller diameter and a riveted connection type, delivering the rigid, load-bearing integrity required in industrial and mechanical drive applications. At 17.6 pounds per length, this is a heavy-duty steel chain suited for high-load power transmission tasks. Licensed HVAC, mechanical, and industrial service technicians use this chain in equipment drives, conveyor systems, and rotating machinery.

This chain is appropriate for power transmission drive assemblies found in commercial and industrial equipment. Typical installation scenarios include sprocket-driven blower assemblies, mechanical conveyor drives, and industrial machinery requiring ANSI 80 standard chain. The 10-foot length makes it practical for field cutting and fitting to the required drive run. Single-strand configuration is standard for most moderate-load industrial drive setups where a compact chain drive is specified.

Key Features

• ANSI B29.1 standard compliance ensures interchangeability across ANSI 80 trade-size sprockets
• 1-inch pitch with 0.625-inch roller diameter for precise sprocket engagement
• Riveted connection type for permanent, high-strength strand integrity
• Steel construction for durability under sustained mechanical load
• Roller width of 0.625 inches and overall width of 1.35 inches for standard sprocket fit
• Pin diameter of 0.312 inches and plate thickness of 0.125 inches for rated load handling

Compatibility

Designed as an ANSI B29.1-compliant replacement or new-install chain for industrial and commercial drive systems using ANSI 80 trade-size single-strand sprockets.

Installation Notes

Installation should be performed by a qualified technician with the drive system fully de-energized and locked out per OSHA lockout/tagout procedures before handling. Use a chain breaker tool sized for ANSI 80 chain to cut the chain to length and a chain connecting link or master link rated for ANSI 80 to close the loop. Ensure sprockets are properly aligned before tensioning. Consult equipment manufacturer specifications for correct chain sag and tensioning guidelines.