Brasscraft PS2056-24 Stainless Steel Gas Connector 24in

Product Description

The BRASSCRAFT PS2056-24 is a corrugated stainless steel gas connector designed to connect gas appliances to residential supply lines. It features a 3/8 inch inner diameter with a 1/2 inch outer diameter and terminates with 1/2 inch FIP on one end and 1/2 inch MIP on the other. At 24 inches in length, this connector provides adequate reach for standard appliance installations including ranges, dryers, and water heaters. Licensed plumbers and gas fitters install this type of fitting as part of the final appliance connection in both new construction and retrofit work.

This gas connector is suited for residential gas appliance hookups where a flexible, corrosion-resistant connection is required between the rigid gas supply line and the appliance inlet. The corrugated stainless steel construction allows for minor positional adjustments during installation without placing stress on the line or fittings. It is appropriate for use with natural gas and liquefied petroleum (LP) gas systems in typical household appliance applications.

Key Features

• Corrugated stainless steel construction resists corrosion in typical residential environments
• 3/8 inch inner diameter (1/2 inch outer diameter) for standard residential gas flow
• 1/2 inch FIP x 1/2 inch MIP end connections for direct appliance and supply line hookup
• 24 inch length provides flexible reach for standard appliance installations
• Flexible corrugated design accommodates minor alignment variation during install

Compatibility

Designed as an OEM-style replacement or new-installation gas connector for residential gas appliances with 1/2 inch FIP inlet and 1/2 inch MIP supply connections.

Installation Notes

Installation must be performed by a licensed plumber or qualified gas fitter in accordance with local codes and IFGC requirements. Shut off the gas supply at the meter or service valve before disconnecting or connecting any gas line fittings. Apply an appropriate gas-rated thread sealant or PTFE tape rated for gas service to all threaded connections. Never bend or kink a corrugated connector to fit, and do not reuse a connector that has been kinked, stretched, or previously damaged.