Bradley S19314LL Drench Shower Eyewash Station 26 Gpm

Product Description

The BRADLEY S19314LL is a combination drench shower and eyewash station designed for emergency decontamination in industrial and commercial facilities. It delivers 26 GPM shower flow and 0.4 GPM bowl flow, both rated at 30 psi operating pressure. The unit features a galvanized steel pipe assembly with a plastic shower head measuring 3.1 inches in diameter and a stainless steel eyewash bowl with a 13-inch diameter. Activation is handled by a push flag foot treadle and a triangular pull rod, allowing hands-free operation during an emergency. The station mounts to the floor and accepts top or mid supply connections through a 1-1/4 inch inlet. Safety professionals and facility maintenance crews install this unit in plants, labs, and chemical handling areas.

The S19314LL is suited for floor-mounted emergency response installations in industrial, manufacturing, laboratory, and chemical processing environments. The open wash station style and dual-function design address ANSI Z358.1-2009 requirements for simultaneous eye and body decontamination. The yellow color provides high visibility in emergency scenarios. It is appropriate for both new construction and retrofit installations where a single floor-supplied drench shower and eyewash combination is required.

Key Features

• Combination drench shower and eyewash station in a single floor-mount unit
• 26 GPM shower flow rate at 30 psi for full-body decontamination coverage
• 0.4 GPM stainless steel eyewash bowl with 13-inch diameter
• Push flag foot treadle and triangular pull rod activation for hands-free operation
• Galvanized steel pipe construction with corrosion-resistant finish
• Accepts top or mid supply via 1-1/4 inch inlet
• Meets ANSI Z358.1-2009 emergency eyewash and shower equipment standard

Compatibility

Designed as a floor-mounted combination drench shower and eyewash station compatible with 1-1/4 inch supply lines configured for top or mid supply connections in industrial emergency safety systems.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ANSI Z358.1-2009 guidelines. Shut off the water supply before making any connections to the inlet. Verify that supply line pressure is adequate to meet the rated 30 psi flow requirements at the point of installation. The unit must be positioned and anchored to the floor per the manufacturer documentation to ensure stable operation during emergency use.