Bradley S19314DC Drench Shower Eyewash Station 26 Gpm

Product Description

The BRADLEY S19314DC is a combination drench shower and eyewash station designed for emergency decontamination in industrial, laboratory, and commercial environments. It delivers 26.0 GPM through a plastic shower head and 0.4 GPM through a stainless steel eyewash bowl, both activated at 30 psi. The unit features a galvanized steel pipe assembly with a triangular pull rod and push-flag activation mechanism. The open wash station style allows simultaneous full-body and eye rinsing. Installation accepts a 1-1/4 inch inlet supply from either the top or mid position. Safety professionals, facilities maintenance crews, and licensed plumbers are the primary installers.

This station is suited for fixed installations in chemical handling areas, manufacturing floors, laboratories, and other locations where ANSI Z358.1-2009 emergency eyewash and shower compliance is required. The combined drench shower and eyewash bowl configuration means a single unit meets both full-body and eye-flush requirements without separate fixtures. Top or mid supply flexibility accommodates a range of existing rough-in conditions, making it practical for both new construction and retrofit installations.

Key Features

• Drench shower delivers 26.0 GPM at 30 psi through a plastic shower head
• Stainless steel eyewash bowl flows 0.4 GPM at 30 psi for eye and face flushing
• Push-flag and triangular pull rod activation for fast, hands-free emergency operation
• Galvanized steel pipe construction for corrosion resistance in demanding environments
• Top or mid supply inlet accepts 1-1/4 inch connection for installation flexibility
• Meets ANSI Z358.1-2009 emergency shower and eyewash equipment standards

Compatibility

Designed as an OEM-style emergency safety fixture for facilities requiring ANSI Z358.1-2009 compliant drench shower and eyewash combinations. Compatible with standard 1-1/4 inch supply lines from top or mid supply configurations.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and ANSI Z358.1-2009 placement requirements, which specify maximum travel distance and response time from hazard areas. Shut off the water supply and depressurize the line before making any connections. Do not restrict or reduce the 1-1/4 inch inlet, as undersizing the supply will compromise required flow rates. After installation, flush the unit thoroughly and verify both shower and eyewash flow rates before placing the station in service.