Bradley S19214B Pedestal Mount Eyewash Station 0.4 Gpm

Product Description

The BRADLEY S19214B is a pedestal-mount eyewash station designed for emergency eye-flush applications in industrial, commercial, and laboratory environments. It features an open stainless steel bowl and a push-flag activation method that allows fast, single-motion operation when seconds matter. The unit delivers a controlled 0.4 GPM flow rate at 30 psi through a 1/2 inch inlet connection. Compliant with ANSI Z358.1, it meets the standard eyewash performance requirements enforced in most regulated worksites. Installation is handled by licensed plumbers or qualified maintenance technicians familiar with emergency safety equipment requirements.

The S19214B suits applications where a deck-mounted, floor-level pedestal station is required — typical in manufacturing floors, chemical handling areas, laboratories, and maintenance facilities. The stainless steel bowl resists corrosion in wet or chemically exposed environments. The push-flag head assembly activates the flow quickly and stays open hands-free, allowing the user to hold their eyes open during the flush cycle. This station is intended for locations where a plumbed, permanent eyewash point is required by safety codes or OSHA regulations.

Key Features

• ANSI Z358.1 compliant for regulated workplace emergency eyewash requirements
• Open stainless steel bowl construction resists corrosion and simplifies inspection
• Push-flag activation provides rapid, single-motion hands-free operation
• 0.4 GPM flow rate at 30 psi through a 1/2 inch inlet connection
• Pedestal deck-mount configuration suits permanent plumbed installations

Compatibility

Designed as an OEM-style pedestal-mount eyewash station for permanent plumbed installations requiring ANSI Z358.1 compliant emergency eye-flush equipment.

Installation Notes

Installation should be performed by a licensed plumber in accordance with applicable local plumbing codes and OSHA 29 CFR 1910.151 eyewash placement requirements. Shut off the water supply completely before making any inlet connections. Verify the supply line delivers adequate flow and pressure at the 1/2 inch inlet before placing the unit in service. After installation, test the activation flag and confirm unobstructed flow before signing off on the installation.