Bostitch BOSSTCR211538 Powercrown Staples 3/8 Inch 5000ct

Product Description

The BOSTITCH BOSSTCR211538 PowerCrown staples are designed for high-volume, heavy-duty stapling applications where standard staples fall short. These staples feature a unique crown geometry that flattens during the stapling stroke, reducing buckling and increasing the force delivered through the stack. Manufactured from high carbon steel wire with finely chiseled points, they drive cleanly through thick document stacks with minimal resistance. The standard leg length is 3/8 inch (9 mm). Each full strip contains 210 staples, and the box contains 5000 staples total. Licensed contractors, office equipment technicians, and facilities professionals keeping B8 series staplers in service will find these the correct replacement consumable.

These staples are specified for use with Bostitch B8 series heavy-duty staplers when stapling more than 20 sheets at a time. Compatible models include the B8 Impulse 45 Electric, B8 Xtreme Duty Plier, and B8 Heavy-duty Plier. The PowerCrown design addresses a common failure mode in high-sheet-count stapling — crown buckling — making them the appropriate choice for document-intensive environments such as print shops, legal offices, school facilities, and building management operations. The 5000-count box format supports extended use between resupply cycles.

Key Features

• Flattening crown design reduces buckling and increases stapling force through thick stacks
• High carbon steel wire construction for consistent drive and holding strength
• Finely chiseled points for maximum sheet penetration capacity
• 3/8 inch (9 mm) leg length suits heavy-duty stapling over 20 sheets
• 210 staples per full strip for efficient loading
• 5000 staples per box reduces resupply frequency in high-volume settings

Compatibility

Designed for use with Bostitch B8 series heavy-duty staplers, specifically the B8 Impulse 45 Electric, B8 Xtreme Duty Plier, and B8 Heavy-duty Plier when stapling more than 20 sheets.

Installation Notes

Load staples into the B8 series stapler magazine with the crown side facing up and the points oriented downward toward the anvil. Before loading, confirm the stapler is empty and not under any spring tension that could cause unintended actuation. Follow the stapler manufacturer's loading procedure and do not force strips into a partially loaded magazine. Dispose of partial strips properly to avoid jamming.