Bosch HCFC2224 Sds Plus Rotary Hammer Bit 3/4x10 in

Product Description

The ROBERT BOSCH TOOL GROUP HCFC2224 is a carbide SDS Plus rotary hammer drill bit engineered for heavy-duty concrete and rebar applications. Part of the Bulldog Xtreme series, this bit measures 3/4 inch in diameter with a 10-inch overall length, an 8-inch flute length, and an 8-inch useable length. It uses diffusion bonding technology to create a stronger carbide-to-steel bond, reducing tip loss and extending service life. Licensed contractors, concrete drillers, and masonry tradespeople working with rotary hammers in demanding conditions will find this bit built to outlast standard SDS Plus options.

This bit is optimized for heavy-duty rotary hammers used in residential and commercial concrete drilling. The centric conical tip guides the bit through concrete for rounder, more accurate holes, while the wear mark confirms hole diameter accuracy throughout the bit's service life. The 4-cutter carbide head design produces less carbide wear than 2-cutter configurations, keeping the operator productive across more holes per bit. It is suited for applications where rebar encounters are common, as the geometry prevents jamming on contact with rebar.

Key Features

• Diffusion bonding technology creates a stronger carbide bond for longer bit life
• 4X longer service life in rebar versus standard SDS Plus bits
• 40 percent more life in concrete than competitive full-head carbide bits
• Centric conical tip guides bit for rounder, more accurate holes
• Wear mark indicator confirms hole diameter accuracy throughout use
• No-jam design when striking rebar during concrete drilling

Compatibility

Designed for use with heavy-duty SDS Plus rotary hammers. The SDS Plus shank fits the standard SDS Plus chuck interface found on most professional rotary hammer tools in this class.

Installation Notes

Installation and use should be performed by qualified tradespeople familiar with rotary hammer operation and masonry drilling procedures. Always power down and disconnect the rotary hammer before inserting or removing the bit from the chuck. Wear appropriate personal protective equipment including eye protection and hearing protection when operating rotary hammers in concrete or masonry. Follow tool manufacturer guidelines for bit insertion depth and chuck engagement to ensure the SDS Plus shank is fully seated before drilling.