Bosch HCBG01T Blugranite Turbo Carbide Hammer Drill Bit 5-pack

Product Description

The ROBERT BOSCH TOOL GROUP HCBG01T is a BluGranite Turbo carbide hammer drill bit designed for drilling into brick, masonry, concrete, and similar hard materials. Sold in a 5-pack, each bit measures 1/8 inch in diameter with a 3-inch overall length and a 2-inch flute length. The hex shank is impact-rated, allowing use in both hammer drill/drivers and impact drivers. Bosch-made carbide construction and a 4-grind head with multi-grind carbide centering tip are engineered to deliver up to 5 times the service life and 2 times the drilling speed compared to standard masonry bits. Licensed contractors and tradespeople working with masonry substrates install this bit as part of routine fastening and anchoring tasks.

The HCBG01T is suited for residential and light commercial masonry drilling applications including brick, block, and concrete. Milled U-flutes with deep-cut spirals channel dust out of the hole quickly, reducing heat buildup and clogging during continuous use. The impact-rated hex shank makes this bit compatible with the wide range of 1/4-inch hex-drive impact drivers already common on job sites, adding versatility without requiring a dedicated rotary hammer for smaller-diameter work.

Key Features

• BluGranite Turbo design rated for up to 5 times the life and 2 times the speed of standard masonry bits
• 4-grind head adds 2 extra cutting angles for extended bit life and faster penetration
• Multi-grind carbide centering tip for accurate starts in brick and masonry
• Impact-rated hex shank fits impact drivers and hammer drill/drivers
• Milled U-flutes with deep-cut spirals for fast dust removal
• Bosch-made carbide construction for durability under heavy loads

Compatibility

Designed for use in 1/4-inch hex-drive impact drivers and hammer drill/drivers. The impact-rated hex shank is compatible with standard hex-chuck power tools used in masonry drilling applications.

Installation Notes

Installation is performed by contractors, electricians, plumbers, or general tradespeople drilling anchor or fastener holes in masonry substrates. Confirm the tool's chuck accepts a 1/4-inch hex shank before use. Always wear appropriate eye and respiratory protection when drilling masonry. Do not use this bit in a standard keyless drill chuck not rated for impact or hammer operation, as this may damage the tool or the bit.