Bosch HC2087 Sds Plus Rotary Hammer Bit 1/2x16x18 3 Pack

Product Description

The ROBERT BOSCH TOOL GROUP HC2087 is an SDS Plus rotary hammer bit engineered for demanding concrete drilling applications. Sold in a package of three, each bit measures 1/2 inch in diameter with a 16-inch working length and an 18-inch overall length. The carbide tip is manufactured using a proprietary Bosch brazing and hardening process, resulting in a tougher, more durable cutting edge under heavy loads. An optimized flute design keeps the bit running cooler and clears material faster, contributing to more holes per bit over the tool's service life. Licensed contractors and trade professionals working with rotary hammers will find the bit suited to production drilling conditions.

The HC2087 is designed for anchoring and through-hole applications in concrete. The centric tip geometry promotes quick starts and accurate hole placement without walking on the surface. A wear mark molded into the bit alerts the user when the carbide tip has worn beyond ANSI specification, providing a clear signal to replace the bit before hole diameter falls out of tolerance. This bit is a practical choice for structural anchoring, rebar clearance holes, and sleeve anchor installation in poured concrete, concrete block, and similar masonry substrates. The 3-piece pack supports job-site productivity by keeping spare bits on hand during high-volume work.

Key Features

• Proprietary Bosch brazing and hardening process increases carbide tip toughness and durability under heavy loads
• Optimized flute design reduces heat buildup and improves chip evacuation for more holes per bit
• Centric tip geometry ensures fast, accurate starts in concrete without skipping
• Wear mark indicates when the tip has worn beyond ANSI specification
• SDS Plus shank fits standard SDS Plus rotary hammer chucks without additional adapters
• Sold as a 3-piece pack for job-site continuity on anchoring and through-hole work

Compatibility

Designed for use with SDS Plus rotary hammers for drilling into concrete and masonry substrates in anchoring and through-hole applications.

Installation Notes

Install into an SDS Plus rotary hammer chuck with the tool powered off and unplugged or battery removed. Confirm the bit is fully seated and locked before operation. Wear appropriate PPE including eye protection and hearing protection when drilling concrete. Replace the bit when the wear mark indicates tip wear beyond ANSI specification to maintain hole diameter tolerance for anchor installation.